USE AND CARE INSTRUCTIONS
21
5.
8.
7.
9.
6.
Set Control Knobs to OFF and open the LP Gas tank valve
SLOWLY 1/4 of a turn
. For Natural Gas open the Shut Off
Valve at source.
Push and turn Right Main Burner Control Knob to .
You will hear a clicking sound as the burner is being ignited.
Always light the RIGHT Main Burner first.
If ignition does not occur in 5 seconds, turn the Burner
Control(s) off, wait 5 minutes, and repeat the lighting
procedure. If ignition still does not occur, turn the burner
control(s) and gas source OFF. Wait 5 minutes for gas to
clear and then conduct a leak test of ALL gas connections
and gas sources as explained in the Use and Care section
of this manual. If no leaks are detected, wait 5 minutes for
any gas to clear and repeat the lighting procedure.
After one Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.
Turn the adjacent burner knob to . The unlit burner will
light automatically. Note: When lighting all main burners,
start with the burner furthest from fuel source location,
then light remaining burners in sequence moving toward
fuel source.
Failure to replace a faulty hose, secure gas supply
connections or to open the Lid before proceeding to
the Lighting Procedures could result in a fire or
explosion that could cause serious bodily injury,
death, or property damage.
WARNING
!
!
Grill Lighting Instructions
1.
Open LP Gas tank
OFF
Rotisserie Burner Lighting Instructions
Follow steps 1 through 5 of the Grill Lighting Instruc-
tions.
Push and turn Control Knob to and hold it in 3-5
seconds to ignite the burner. Once the burner is
ignited, continue to press and hold it in 5 - 10 seconds
before releasing.
If ignition does not occur in 5 seconds, turn the Burner
Control off, wait 5 minutes, and repeat the lighting
procedure. If ignition still does not occur, turn the
burner control and gas source OFF. Wait 5 minutes for
gas to clear and then conduct a leak test of ALL gas
connections and gas sources as explained in the Use
and Care section of this manual. If no leaks are
detected, wait 5 minutes for any gas to clear and
repeat the lighting procedure.
After Burner is lit, turn the tank valve SLOWLY one more
1/4 of a turn.
IMPORTANT:
Do not use the Rotisserie Burner and Main
Burners at the same time. Rotisserie burner is for Rotis-
serie Cooking only.
1.
2.
3.
4.
Before each use, check all hoses for cracks, nicks, cuts,
burns or abrasions. If a hose is damaged in any way, do
not use your grill before replacing the hose with an
authorized part from the Parts List. Also make sure all
gas supply connections are securely tightened.
Familiarize yourself with all Safety and Use and Care
instructions in this manual. Do not smoke while
lighting your grill or when checking the gas supply
connections.
Be sure the LP Gas tank is filled.
Open the Grill Lid.
4.
3.
2.
OFF
(for Model BTE3221(A,B)LP/NG)
(for Model BTE3821BLP/NG )
Main Burner
Back Burner
OFF
Manually Lighting Your Grill By Paper Match
To light your gas grill by match, insert a match into the
Lighting Stick and follow steps 1 through 5 of the Grill
Lighting Instructions to light the burners. Then, light the
match and place Lighting Stick through the Cooking Grids
on the grill (See Diagrams Below) to light the main
burners. Turn the correlated Control Knob to the setting
to release gas. The Burner should light immediately.
Light Operation
This grill is equipped with two interior halogen lights and
decorative knob lights for late night grilling.
Push the light switch located on the control panel to turn
"ON"/"OFF" interior and knob lights.
WARNING: Do not touch the interior halogen lights. It may
be hot and could cause serious burns.
1.
Main Burner
Back Burner
