ENG
22
INSTALLATION TEMPLATE AND WALL MOUNT
Attach the installation template to the wall. Drill 5 mm holes
where indicated by the template. Remove the template befo-
re attaching the wall mount. Use the coach screws (4 screws)
and a 13 mm socket wrench to attach the wall mount.
Main relay
Cable connector
seals
Connector
Main switch
Outlet 1 A
Heating
alternation
CONNECTION SPACE
The cover of the connection space is attached with four
screws. Loosen the four screws (PZ1) indicated in the im-
age below and carefully remove the lid (the screws are PZ1
3.5x9.5 DIN 7981 screws with PH cruciform recess). Intro-
duce the cables through the opening in the middle of wall
mount and connect as instructed. Reattach the cover of the
connection space with the six screws. Install the heater on the
wall mount. Pages 43–47.
AH
DETAIL AH
Summary of Contents for HALLA E
Page 47: ...47 FIN SWE RUS ENG GER SS1179 ...
