Tufline MVT1710, Operator'S Manual, Page: 21 / 50

Dealer Instructions 18
Safety Light Assembly MVT
MVT Safety Light
neccesary to loosen the 5/8” hex nut(Ref.5) in
order to rotate the light mount bracket and
attach the light fixture. Attach the light fixture to
the light mount bracket using the 1/4” X 1 1/2"
Gr. 2 hex bolts(Ref.1) and 1/4" nylon hex
nuts(Ref.4) and tighten. Please see Bolt Torque
Chart (Page 45) for proper torque information.
Turn the light unit so that the red and orange
lights are to the rear and the orange is on the
outside. Make sure they are clearly visible from
the rear of the unit and tighten the 5/8” nut.
Please see Bolt Torque Chart (Page 45) for
proper torque information.
Always comply with all state and local
laws governing highway safety and light-
ing and marking requirements.
The light mount brackets (Ref.3) are attached to
the rear gang beams from the factory. It may be