Connecting BCP2416 Cultipacker to Tractor
The Cultipacker is compatible with tractors
equipped with Category 1 and Catagory 2 , 3-point
hitch systems that use side-swing type lower lift
arms. The Cultipacker will also fit tractors equipped
with an Category 1 or Category 2 Quick Hitch
system.
Category 1 Standard 3-Point Hook-up
1. Attach the tractor’s lower lift arms to the
Cultipacker on the inside lower hitch pins.
Re-install the lynch pins.
2. Attach the tractor’s top link to the Cultipacker
A-Frame, using the heavy-duty top link pin and
lynch pin supplied, with the top link to the upper
top link pin hole.
Category 1 Quick Hitch (Figure 9)
1. Connect the tractor’s Quick Hitch by guiding the
top hook through the lower top link pin with
bushings.
2. Install bushing set (sold separately part #15638)
over the inside mounting pin supplied with
Cultipacker. Re-install lynch pins.
3. Upper bushing should already be installed to
the top link.
Figure 9. Category 1 Quick Hitch Set-up
Lower Quick Hitch bushings
(Sold separately)
Operation 14
Category 2 Standard 3-Point Hook-up
1. Attach the tractor’s lower lift arms to the
Cultipacker on the lower outside hitch pins.
Re-install the lynch pins.
2. Attach the tractor’s top link to the Cultipacker’s
mast, using the heavy-duty top link pin and lynch
pin supplied, with the top link to the upper top link
pin hole.
Category 2 Quick Hitch (Figure 10)
1. Slide lower sleeve (sold seperatly part
#15638) over the outside mounting pin supplied
with Cultipacker. Re-install lynch pins.
2. Slide upper sleeve over the heavy-duty top
link pin supplied with top link. Reinstall lynch
pin.
3. Connect the tractor’s Quick Hitch to the
Cultipacker through the upper set of holes.
Figure 10. Category 2 Quick Hitch Set-up
Lower Quick Hitch bushings
(Sold separately)