Connecting CP-48L, CP-72L, BCP1816
Cultipacker to Tractor
The Cultipacker is compatible with tractors
equipped with Category 1, 3-point hitch systems
that use side-swing type lower lift arms. The
Cultipacker will also fit tractors equipped with an
Category 1 Quick Hitch system.
Category 1 Standard 3-Point Hook-up
1. Attach the tractor’s lower lift arms to the
Cultipacker on the lower hitch pins. Re-install the
lynch pins.
2. Attach the tractor’s top link to the Cultipacker
A-Frame, using the heavy-duty top link pin and
lynch pin supplied, with the top link to the upper
top link pin hole.
Category 1 Quick Hitch (Figure 7 and 8)
1. Connect the tractor’s Quick Hitch by guiding the
top hook through the lower top link pin with
bushings.
2. Install bushing set (sold separately part #15638)
over the mounting pin supplied with Cultipacker.
Re-install lynch pins.
3. Upper bushing should already be installed to
the top link.
13 Operation
Figure 7. Category 1 Quick Hitch Set-up
for CP-48L and CP-72L
Lower Quick Hitch bushings
(Sold separately)
Figure 8. Category 1 Quick Hitch Set-up
for BCP1816
Lower Quick Hitch bushings
(Sold separately)