4.
Edit the settings as required.
5.
Set
Update IPMI LAN Configuration
back to
No
.
6.
Save settings and reboot the appliance.
Configure RMM Using SSH or a Console
1.
Make sure that the MGMT port for the appliance is connected to the network.
2.
Connect the appliance using SSH or a console and set the following network settings:
ipmitool lan set 1 ipaddr <RMM IP Address>
ipmitool lan set 1 netmask <Subnet Netmask>
ipmitool lan set 1 defgw ipaddr <Default Gateway IP Address>
3.
Verify the configuration:
ipmitool lan print 1
4.
Ping the RMM IP address to confirm connectivity:
ping <RMM IP Address>
5.
Configure the user settings:
a.
a.
Check the existing user list:
ipmitool user list 1
b.
Create or modify users. This command will create a new user or overwrite settings for an existing User ID.
ipmitool user set name <user_id> <username>
ipmitool user set password <user_id>
T-800/1200 Quick Start Guide
Chapter 6: Setting up the Remote Management Module
Copyright 2003-2021, Tufin Software Technologies Ltd.
19
