Period:
Range:
133·3ns to 100s.
Resolution:
4-digit.
Accuracy:
±1 digit of setting.
Delay:
Range:
Resolution:
-99·9s to + 99·99s
0·002% of period or 33·33ns, whichever is greater.
Width:
Range:
Resolution:
33·3ns to 99·99s
0·002% of period or 33·33ns, whichever is greater.
Note that the pulse width and absolute value of the delay may not exceed the pulse period at any
time.
Pulse trains of up to 10 pulses may be specified, each pulse having independently defined width,
delay and level. The baseline voltage is separately defined and the sequence repetition rate is set
by the pulse train period.
Arbitrary
Up to 50 user defined waveforms may be stored in RAM. Waveforms can be defined by front
panel editing controls or by downloading of waveform data via RS232 or GPIB.
Waveform Memory Size:
64k points. Maximum waveform size is 64k points, minimum
waveform size is 4 points.
Vertical Resolution:
12 bits
Sample Clock Range:
100mHz to 30MHz
Resolution: 4
digits
Accuracy:
± 1 digit of setting.
Sequence
Up to 4 waveforms may be linked. Each waveform can have a loop count of up to 32768.
A sequence of waveforms can be looped up to 1048575 times or run continuously.
Output Filter
Selectable between 10MHz Elliptic, 10MHz Bessel or none.
MODULATION MODES
Triggered Burst
Each active edge of the trigger signal will produce one burst of the waveform, starting and
stopping at the waveform position specified by the sync marker setting.
Carrier Waveforms:
All standard and arbitrary
Number of Cycles:
1 to 1048575
Trigger Repetition Rate:
dc to 50 kHz internal, dc to 1MHz external.
Source:
Internal from keyboard or trigger generator.
External from TRIG IN or remote interface.
5