12
1000V CLAMP METER
RESISTANCE MEASUREMENT
WARNING
!
• To avoid damaging the meter or to the device under test, disconnect
circuit power and discharge all the high-voltage capacitors before
measuring resistance.
• To avoid electric shock, do not input higher than DC 60V or
AC 30V voltages.
1. Connect common test lead to the COM terminal, then insert the red test lead to V Ω
terminal.
2. Set the function selector to the measurement setting
Ω
, press
SELECT
until the resistance
icon
Ω
appears on the display.
3. Ensure all power is off in the circuit being measured and that all capacitors have been
discharged.
4. Measure resistance by connecting test leads to circuit.
NOTE:
•
If the resistance open circuit or resistance being measured exceeds the maximum range of
the meter, display will show “OL”.
HOLD
REL
MAX
MIN
V
COM
CAT II 1000V
CAT III 600V
Ω
600A AC Digital Clamp Meter
True RMS
6000 Counts
SELECT
NCV
V
600A
60A
6A
OFF
Ω
