13
OPERATING MANUAL
CONTINUITY TESTING
WARNING
!
• To avoid damaging the meter or to the device when testing, disconnect
circuit power and discharge all the high-voltage capacitors before
testing for continuity.
• To avoid electric shock, do not input higher than DC 60V or AC 30V
1. Connect common test lead to the COM terminal, then insert the red test lead to V Ω
terminal. Set the function selector to the measurement setting
2. Press
SELECT
until the screen displays
3. Ensure all power is off in the circuit being measured and that all capacitors have been
discharged.
4. Measure continuity by connecting test leads to circuit.
5. When the measured resistance between two terminals is <30 Ω, the circuit should be
deemed conductive, the buzzer will sound continuously.
NOTE:
•
After completing all measurement operations, disconnect the test leads from the
measured circuit.
HOLD
REL
MAX
MIN
V
COM
CAT II 1000V
CAT III 600V
Ω
600A AC Digital Clamp Meter
True RMS
6000 Counts
SELECT
NCV
V
600A
60A
6A
OFF
Ω
