15
OPERATING MANUAL
CAPACITANCE MEASUREMENT
WARNING
!
To avoid possible damage to the meter and to the device under test,
disconnect circuit power and discharge all high-voltage capacitors before
measuring capacitance. Use the DC Voltage function to confirm that the
capacitor is discharged.
1. Connect common test lead to the COM terminal, then insert the red test lead to V Ω
terminal. Measure by REL mode.
2. Push the range switch to the measurement setting
3. Press
SELECT
to select , connect test leads in parallel with the two terminals of
measured capacitance.
4. Ensure all power is off in the circuit being measured and that all capacitors have been
discharged.
5. Touch test leads to the capacitor
NOTE:
•
If the measured capacitor is short circuited or the capacitance exceeds the maximum
range of the meter, the display will show “OL”. It will take a longer time to
achieve the
correct reading when measuring capacitance larger than 600µF
HOLD
REL
MAX
MIN
V
COM
CAT II 1000V
CAT III 600V
Ω
600A AC Digital Clamp Meter
True RMS
6000 Counts
SELECT
NCV
V
600A
60A
6A
OFF
Ω
