10
1000V CLAMP METER
AC VOLTAGE MEASUREMENT
1. Connect common test lead to the COM terminal, then insert the red test lead to V Ω
terminal.
2. Set the function selector to the V setting and connect the test lead in parallel with the
power or load to be measured.
3. The meter will auto-range to display the most appropriate measurement.
NOTE:
•
Do not input voltage higher than AC 750V as damage to the meter may result.
•
After completing all measurement operations, disconnect the test lead from the measured
circuit.
•
When measured voltage is higher than the safety voltage 30V AC, the meter displays the
high voltage warning prompt ”
“
•
When measured voltage is higher than 750V AC, the meter beeps and displays the high
voltage warning prompt.
HOLD
REL
MAX
MIN
V
COM
CAT II 1000V
CAT III 600V
Ω
600A AC Digital Clamp Meter
True RMS
6000 Counts
SELECT
NCV
V
600A
60A
6A
OFF
Ω
V
