TT Robotix Commander, Instruction Manual

Page: 6 / 10

Forward Direction (Indicates Front Side)
Drone Movement Mode 2 Mode 1
Aileron
Elevator
Throttle
Rudder
3. Range-Check
A built-in range-check function on the transmitter reduces signal strength for pre-flight range-
check. When this function is activated, signal strength is weak. Use the weak signal strength for
pre-flight range-check to confirm operation of wireless radio control system is normal. It is
recommended to perform a complete range-check before every flight.
NOTE
Never push the “Binding SW” button during flight. Flying under weak signal strength will result in signal
loss and model crash.
Range-Checking” procedure:
a) Turn both transmitter and model power on and ensure the system is functioning properly.
b) Take the transmitter to a distance of about 20~30m from the model.
c) Press and hold the “Binding SW” button. Signal strength is now weak. The transmitter buzzer
will signal with a “Bi - - Bi” warning tone. Please do not release “Binding SW” at this stage.
d) Operate both left and right sticks to drive movement on the servos.Visually confirm that all
movements are accurate and signal is interference-free.
e) Release “Binding SW” button. Signal reverses back to full strength and warning tone stops.
And the warning tone also will stop in the same time.
f) Model is ready to fly.
4. Stick Controls
5