TSI Instruments AEROTRAK 9310, Operation Manual

Page: 32 / 91

3-2 AeroTrak
®
Portable Airborne Particle Counter
S c r e e n L a y o u t a n d F u n c t i o n a l i t y
There are four main screens (tabs): Main, Setup, Data, and Reports. The
operation of each of these screens, the information displayed on them,
and the operations you can perform from each are described in the
remainder of this chapter.
Some screens require or allow you to enter information. To enter
information, tap on the screen and an on-screen keyboard appears.
Software Input Panel (Keyboard or Keypad)
1. Throughout the setup screens, a keyboard or keypad appears on the
screen when text or numbers may be entered.
2. When you enter information using the keyboard, press either the

( Enter ) or Esc keys when you are done. When you enter data
using the keypad, the data is entered when you press OK on the
screen. The keyboard will then be hidden until another text entry box
is selected.
3. When numeric input is needed, a numeric keypad will appear on
the screen.
Main Tab
The Main Tab is the default screen. The left side of the screen
summarizes the concentrations for the currently selected location. Tap on
the size and count portion of the screen to enable Zoomed Data Screen
(see
Setup Tab ).
The display shows:

Temperature
*

Relative humidity*

Air Velocity*

Bin sizes

Particle count/concentration
*
Temperature, Humidity, and Air Velocity are displayed only if the optional T/H probe is installed.