28
4.2 Install the Media spacer kit (Optional)
1.
Open the printer media cover by pressing the
media cover release button.
2.
Insert the media spacers to both sides of slots then
complete the installation.
NOTE:
The media spacer kit could easily change the media fix
width ranged from 1”, 1.5”, to 2” by moving both sides of
the adapters.
When install the media spacers, the number of media
spacers should be same on both sides.
Slot
1” width
1.5” width
2” width
Summary of Contents for TDM-20
Page 58: ...53 NCC NBTC SDoC...
Page 63: ...58 9 Revise History Date Content Editor...
Page 64: ......
