23
3.2 Charge the Battery
3.2.1 Charge the Battery
It takes 1.5 to 2 hours to fully charge the battery before the first time usage. The lifetime of the battery is 300 times for
charge/discharge cycles.
1.
Open the interface cover and plug the power cord
into the power jack.
2.
Plug the power cord into a properly power outlet.
Note:
Please refer to section 2.3.2 for more information
about battery charging cycle.
Charging Temperature
The battery normal working condition is from 0°C to 40°C (32 °F to 104 °F). The device or battery charger always perform
battery charging in a safe and optimummanner. At higher temperatures (e.g. approxi40 °C (+104 °F) or charging when
turning on the printers), the printer or battery charger may stop charging for a period of time to keep the battery at acceptable
temperatures.
Summary of Contents for TDM-20
Page 58: ...53 NCC NBTC SDoC...
Page 63: ...58 9 Revise History Date Content Editor...
Page 64: ......
