TSC TDM-20 User Manual Download Page 60

Page: 60 / 64

Except for US, JP Model

Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus,

iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPad Pro 12.9-inch (2nd generation), iPad

Pro 10.5-inch, iPad (6th generation), iPad (5th generation),

iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad Air,

iPad mini 2, iPod touch (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

California Perchlorate Material Notice

Perchlorate material - special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

This product’s coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California.

Summary of Contents for TDM-20

































































Search results

Summary of Contents for TDM-20

Reviews:

Related manuals for TDM-20

Brands by name

Popular brands

TSC TDM-20, User Manual

Search results

Summary of Contents for TDM-20

Reviews:

Related manuals for TDM-20

Brands by name

Popular brands