manualshive.com logo in svg

TSC M23 series, User Manual

Share
Download
TSC M23 series User Manual Download Page 43

 

40

Press the 

 button under 

¨

 icon to move the cursor from left to right, and 

press the 

  button to set the value. Press the 

  button under “V” icon to 

save the setting. 
 

4.1.5.3 Local Name: 

Use this option to view and set the Bluetooth local name. The local name is 
used for identification purposes with host, not authentication. 
 

       

 

 

Press the 

 button under 

¨

 icon to move the cursor from left to right, and 

press the 

  button to set the value. Press the 

  button under “V” icon to 

save the setting.

 

4.1.5.4 Information: 

Use this option to view the Bluetooth information. Press any 

  button to return 

Bluetooth menu. 

 
 
 

   

 

4.1.6 Display

 

 

 

 

 

 

 

 

4.1.6.1 Contrast: 

Adjust the LCD display contrast. The adjustable range is between 0~100. It’s 
depending on your viewing angle. Printer default setting is 50. 

 

 

 

 

Press 

  button under “+” icon to raise the contrast, and “–” icon to lower it, 

and “V” icon to set it into printer. 

Local Name 

BT23 

¨

     

©

     

  V

 

Security Disable 
PIN :0000 
Name:BT23 
Addr:008037211ee9 

Contrast - Backlight -  Exit 

Contract 

50 

+     -

     

  V

 

Display

 

Summary of Contents for M23 series






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands