TSC M23 series Page 39 User Manual Download

Page: 39 / 69

Press

button under

and

icon to select the different options, and

press

button under “

]

” icon to enter the option.

4.1.4.2.1 IP Address

Press the

button under

icon to move the cursor from left to right,

and press the

button to set the value from “0” to “9”. Press the

button under “V” icon to save the setting and return the Configure menu.

4.1.4.2.2 Subnet Mask

Press the

button under

icon to move the cursor from left to right,

and press the

button to set the value from “0” to “9”. Press the

button under “V” icon to save the setting and return the Configure menu.

4.1.4.2.3 Gateway

Press the

button under

icon to move the cursor from left to right,

and press the

button to set the value from “0” to “9”. Press the

button under “V” icon to save the setting and return the Configure menu.

4.1.4.2.4 Power Mode

Press

button under

and

icon to select the different modes, and

press

button under “

]

” icon to set it. CAM is Continuous Awake

Mode. PSP is Power Save Protocol. PSP conserves battery power. CAM
means the printer is continuously receiving and transmitting data. This

IP Address

000.000.000.000

Subnet Mask

000.000.000.000

Gateway

000.000.000.000

CAM

PSP

]

Summary of Contents for M23 series






































































Search results

Summary of Contents for M23 series

Reviews:

Related manuals for M23 series

Brands by name

Popular brands

TSC M23 series, User Manual

Search results

Summary of Contents for M23 series

Reviews:

Related manuals for M23 series

Brands by name

Popular brands