25
4.1.1.4 Print Mode: (Tear Off Mode/Batch Mode/Peeler Mode)
This option is used to set the print mode. Printer default setting is Batch Mode.
When enter this list, the print mode in the right side of
¨
icon is the printer
current setting. Press
button under
ª
and
©
icon to select the different
print mode, and press
button under “V” icon to enable the setting.
Printer Mode
Description
Tear Off Mode:
Next label leading edge is aligned to the print head burn
line location.
Batch Mode:
Once image is printed completely, label gap/black mark will
be fed to the tear plate location for tear away.
Peeler Mode: Enable the label peel off mode.
4.1.1.5 Offset:
This option is used to fine tune media stop location. Press the
button
under
¨
icon to move the cursor from left digit to right digit, and press the
button to set the value from “+” to “-” or “0” to “9”. Press the
button under
“V” icon to set the value into printer. The default value is +000.
4.1.1.6 Reference X & Reference Y:
This option is used to set the origin of printer coordinate system horizontally
and vertically. Press the
button under
¨
icon to move the cursor from left
digit to right digit, and press the
button under
ª
icon to set the value from
“0” to “9”. Press the
button under “V” to set the value into printer. The
default value is 000.
¨
Batch Mode
Peeler Mode
ª
©
V
Offset
+000
¨
ª
V
Reference X
000
¨
ª
V
Reference Y
000
¨
ª
V
