batteries, be careful to avoid contacts with the liquid. In case
design of the machine, the following risks may occur:
of accidental contacts with the liquid wash the affected
-
Touching the blade while working in the unprotected area of t
he
locations with water. When liquid penetrates eyes, seek also
jigsaw;
for medical assistance.
The liquid that leaks from batteries may be
-
Burns when replacing the blade. (The blade gets very hot during
a reason for irritation or scalds.
operation, use protective gloves to avoid burns when replacing it);
When the battery unit is not in use keep it far away from
-
Throwing a machined part or pieces of a machined part,
metallic items such as paper clips, coins, keys, nails, bolts or
other metal things that may short the battery terminals.
-
Blade cracking/breaking;
Shorts of battery terminals may cause burns or fires.
-
Hearing damage in case of failure to use necessary hearing protection;
Never throw batteries to fireplaces.
-
Harmful emissions of wood dust when working in closed premises.
Never charge a damaged battery.
The batteries are intended for multiple use and contain
harmful lithium.
Cordless jigsaw
Upon the battery lifetime expires the battery must be disposed
ź
Parallel guide
in accordance with environmental regulations. Discharge the
Guide fixing screws
battery first top the empty state and remove from the electric tool. Hand
over to an organization that deals with utilization of batteries or take it
Blade
back to the shop where the tool had been purchased.
ź
Hex key
Using the charger:
Operating instruction-
a)
Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
b)
Do not disassemble the charger.
The numbering of device elements refers to the drawing on pages 2-3 of the
c)
The charger is designed exclusively for indoor use.
It must not be
instruction manual:
exposed to water or moisture.
Fig.
Guide fixing screws
d)
Charge only in an ambient temperature between 15-25
degrees.
Contact protection
e)
Do not insert metal objects of any kind into the charger.
Laser pointer
Laser pointer on/off button
CONSTRUCTION AND PURPOSE OF THE JIGSAW:
The cordless jigsaw is equipped with an electronic speed control system.
Safety button
Speed regulation and 4-step adjustment of the blade's movement allow
On/off switch
optimal cutting process efficiency.
Handle
The jigsaw is used for making cuts and patterns in wood and similar
Battery*
materials, plastics, metal, ceramic plates and rubber. The cutting process
is performed using a suitable saw blade, appropriate to the material
Battery lock button*
being processed.
Adjustable foot (0° - 45°)
The device can be sued for straight cuts and angled cuts at an angle of up
Plastic cap
to 45°. It is intended for domestic and industrial use of average intensity.
It is not suitable for long-term work in difficult conditions.
Pendulum action switch
Parallel guide
Each application of the tool not in line with
Blade
the intended use as specified below is strictly forbidden and makes the
Battery level indicator button*
warranty terms null and void. The manufacturer shall not be held
responsible for possible consequential damage that may arise due to or
Battery level indicator*
in connection with such application.
Charger*
Any modifications of the tool by the user relieve the manufacturer from
Fig.
Blade clamp
responsibility for any damage and injuries to the user and the
Fig.
surroundings.
Proper use of the jigsaw also applies to maintenance, storage, transport
Fig.
Hex key
and repairs.
Foot fixing screw
The jigsaw can be repaired only at service centres designated by the
Angle scale
manufacturer. Battery-powered devices should be repaired only by
* The accessories shown or described are not standard equipment.
authorised persons.
Proper use cannot guarantee that no residual risk will occur. Due to the
For the complete offer of auxiliary equipment, see our catalogue.
i
)
j
)
k
)
n
The set includes:
pc.
pc.
pc.
pc.
pc.
1pc.
ź
Warranty card - 1 pc.
n
Device components
A: 1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Do never use the tool for applications that need use of
13.
professional equipment.
14.
15.
16.
17.
B 18.
D: 19.
Adapter
G: 20.
21.
22.
ź
-1
-1
ź
-2
ź
-
1
-1
ź
*
7
Li-Ion
