TRUST 910Z POWERC@M OPTICAL ZOOM
3
U K
Item
Description
Function
Do not block the sensor while taking
pictures.
5
Viewfinder
The viewfinder helps you to frame a picture.
The actual picture is taken with the lens and
not with the viewfinder.
6
Lens
The lens focuses the light onto the digital
image capturing circuitry. For the best
picture quality, ensure it remains free of
dust, fingerprints, and scratches.
7
Microphone
Records audio when the camera is capturing
video-clips.
Table 1: Functions of the front of the camera
3.2
Rear of the camera
Use table 2 in combination with figure 2.
Item
Description
Function
1
Status LED
When the camera is busy (and not available
to take a picture), the LED will flash. When
the camera is ready, the LED will be solid
green.
2
Viewfinder
See chapter 3.1 (item 5)
3
Power Button
Press this button to turn on the camera.
Press it again to turn it off.
4
WB/Delete
Press this button to cycle through the White
Balance pre-sets: Auto, Daylight, Shade,
Tungsten and Fluorescent when taking
pictures. See also chapter 6.2.
5
Strobe / Copy
Copies pictures during playback from
internal camera memory to the external
SD/MMC memory card if available.
6
Zoom Out Key
Zooming out of the object while in Snapshot,
Pre-set, Video or Playback-mode. This
button could not be used during recording
video-clips.
7
Zoom In Key
Zooming into the object while in Snapshot,
Pre-set, Video or Playback-mode. This
button could not be used during recording
video-clips.
8
Shutter Button
Press this button to create a digital photo.
While navigating through the
camera’s options menus, use the Shutter
Button to go back to the previous selection.
9
Power
Connect an external AC power-adapter here
(not provided by this camera!) for external
power source.
10
Video Out Jack
Connect the video out cable to the camera
and your television to use the camera as a
digital video player. Video out cable is
provided with this camera. See also chapter
5.6
