TRUST 910Z POWERC@M OPTICAL ZOOM
11
U K
8.
The next photograph can be taken when the LED no longer flashes. The
photograph has been saved in the camera’s memory.
Note
:
Keep the glass of the lens clean. Use a lens tissue to clean the lens. If
necessary, use special cleaning liquid for camera lenses. Do not use
a different cleaning product.
Tip
:
The quality of the photograph depends on the surrounding light. More
light will result in a better picture.
Tip
:
The number of photographs that can be taken depends on the
number of details of the object to be photographed. The photograph
indicator on the LCD screen is an approximation.
Tip
:
The image viewed through the viewfinder may be slightly different to
what is recorded through the lens. You can use the LCD for greater
accuracy.
5.3.2
SNAPSHOT mode’s button functions
Up Button
Increases the camera exposure compensation, which allows in
more light.
Down Button
Decreases the camera exposure compensation, which
gradually blocks light.
Display Button
Browse through the following LCD display settings: Press once
to activate histogram. Press twice to turn off battery-,
remaining pictures/quality-indicators. Press again to turn off
LCD screen.
Strobe / Copy
Determines how the strobe light (flash) is used. Pressing the
Strobe key cycles through the following settings: Auto (A), On,
Red-Eye Reduction and Off.
WB / Delete
Adjusts the White Balance settings. Pressing the WB key
cycles through the following settings: Auto, Day Light, Shade,
Light Bulb (incandescent light), and Fluorescent Light.
Zoom Out
Widens the area which is framed by the camera’s lens.
Zoom In
Enlarge the subject which is framed by the camera’s lens.
Table 7.2: Snapshot mode’s button functions
5.3.3
Taking pictures in PRE SET mode
Pre-set Mode has five pre-set settings optimised for taking specific types of pictures:
Macro, Self-Timer, Landscape, Portrait and Night-Scene.
1.
Turn the camera on using the ON/OFF button (3).
2.
Place the MODE DIAL (13) in the PRE SET mode (5, figure 4).
