TRUST 910Z POWERC@M OPTICAL ZOOM
2
2.2 Batteries
Important:
To get the best performance from your camera, we recommend
using rechargeable NiMH-batteries (not supplied!).
-
Observe proper precautions when handling batteries. Uses only size AA
alkaline batteries. Batteries may leak or explode if handled improperly.
-
The alkaline batteries supplied with the camera are not rechargeable. Do not
try to recharge them, because this may cause them to explode.
-
Remove batteries (and memory card) from the camera if you are going to
store the camera for extended periods of time. Ensure the camera is turned
off before inserting or removing batteries.
-
Do not insert batteries backwards or upside down.
-
Do not disassemble batteries.
-
Do not expose batteries to flame or excessive heat.
-
Do not immerse batteries in or expose to water.
-
Never throw the batteries onto an open fire. The batteries may explode.
-
Keep the batteries out of the reach of small children.
-
Discontinue use immediately if you notice any changes in the battery such as
discoloration, deformation or leakage.
-
When the alkaline batteries are empty, ask your local authority where you
can dispose of them.
Note:
Alkaline or NiMH batteries type AA are suitable for use with this
device.
Note:
Do not use old and new batteries at the same time, because the
old batteries may deplete the new ones.
Note:
The batteries should be removed if the camera is not going to be
used for some time. This will save the battery capacity.
Note:
To get the most from your camera, we recommend using
rechargeable NiMH-batteries (not supplied!).
3
Description of the camera
3.1
Front of the camera
Use table 1 in combination with figure 1.
Item
Description
Function
1
Shutter Button
Press this button to take pictures, or to
select menu options.
2
Built-in Flash
For taking photographs when there is
insufficient light. The flash has a maximum
effective range of 3 metres.
3
Self-Timer LED
When the Self-Timer option is being used,
this LED will blink for ten seconds before the
camera takes a picture.
4
Light Sensor
The digital camera automatically detects
ambient light levels and determines whether
or not the flash is needed. Light
measurements are made with this sensor.
