TRUST 500FX POWERC@M FLASH
19
U K
3.
Storyboard:
Add existing video clips to the project. Change the order of the
video clips and trim the video clips so that you only have the video fragments
that you require.
4.
Effects:
Add various transition effects between the video clips. You can
choose from a hundred different effects.
5.
Title:
Add a title to the video. You can alter the text colour, font, size, etc. and
also select various text effects, such as text which scrolls from the bottom to
the top.
6.
Voice:
Add new audio recordings to the video project or select existing sound
fragments from the menu.
7.
Music:
Add background music to the video project directly from your music
CD or from saved music files (also MP3 support).
8.
Finish:
Save your video project in Ulead VSP format. Click on ‘Make
movie’ to make the final video and export it to the desired video format. You
can choose from the following video formats:
- Microsoft AVI (*.avi)
- Advanced Streaming Format (*.asf)
- Autodesk Animation Files (*.flc)
- Autodesk Animation Files (*.fli)
- Autodesk 16-bit Animation Files (*.flx)
- QuickTime Movie Files (*.mov, *.qt)
- MPEG Files (*.mpg)
- RealNetworks RealVideo Files (*.rm)
- Ulead Image Sequence Files (*.uis)
9.
If desired, you can click on ‘Make Sound’ to record the sound separately
as a Microsoft Wave (*.wav) file or an MPEG Audio File (*.mpa).
Note:
For more information, see the extensive Help function in Ulead
VideoStudio 4.0 and the instruction manual. You can easily access
this via the Trust Software Installer menu on the installation CD-ROM.
The Trust Software Installer starts automatically when the CD-ROM is
inserted into your CD-ROM drive (see figure 3). Click on ‘VIDEO
STUDIO MANUAL’ to open the instruction manual directly from the
CD-ROM. The instruction manual is available in English, German,
Spanish, French and Italian.
9.5 VideoLive
This chapter explains the most commonly used components of VideoLive Mail. For
more information, refer to the Help function of VideoLive Mail.
9.5.1 Once-only
settings
When you start the VideoLive Mail program for the first time, a Set-up Wizard will
appear which you can use to configure the program. It is recommended to complete
this Wizard. During the Wizard, you will be asked:
•
Your name: fill in your own name.
•
Your e-mail address: fill in your e-mail address.
•
Your mail server: fill in your ‘Mailhost’ or ‘stmp server’ provided by your
Internet Service Provider.
•
Your account name: fill in the user name given to you by your Internet
Service Provider.
Note:
You should have your Internet Service Provider’s information available
when setting up your mail server.
1.
Click on ‘Yes’ to continue.
2.
Click on 'OK' to continue. Figure 4 will appear.
