TRUST 500FX POWERC@M FLASH
11
U K
Note
:
The camera cannot be turned off whilst it is connected to the computer’s
USB port. The camera uses the power from the computer’s USB port.
The batteries will not be used.
7.4
Checking after the installation
After installing the device and the driver, the following are installed on your computer
and can be checked:
‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the
‘Device Manager’ tab.
- Imaging device – TRUST 500FX POWERC@M FLASH, WDM Video Capture
- Imaging device – TRUST 500FX POWERC@M FLASH, DSC Bulk Drive
- Universal Serial Bus controllers
- TRUST 500FX POWERC@M FLASH, USB Camera
‘Start – Settings – Control Panel’ and then double-click on the ‘Add/Remove
Programs’ icon.
- TRUST 500FX POWERC@M FLASH
- TRUST 500FX POWERC@M FLASH WDM VIDEO CAPTURE
Start - Programs - Trust – 500FX PowerC@M Flash
- TRUST 500FX POWERC@M FLASH
- Uninstall TRUST 500FX POWERC@M FLASH
Note:
The information given above will vary when the installation has been
altered by the user (for example, not everything has been installed or
locations other than the default locations have been selected).
Note:
Deviations may also occur as a result of using new drivers available on
the Internet.
Note:
The location or name may vary in the ‘Control Panel’ for different
operating systems.
