TRUST 500FX POWERC@M FLASH
15
U K
9.1.2
Loading video recordings
1.
Carry out points 1 to 6 in chapter 9.1.1.
2.
Click on ‘Load’.
9.1.3
Sending a recording via e-mail
1.
Carry out points 1 to 9 in chapter 9.1.1.
2.
Next, click on B in figure 4.
3.
Select a recording from location K in figure 4 by clicking on it.
4.
Click on G in figure 4 to send the recording via e-mail.
9.1.4
Making a live recording
1.
Click on ‘Live’ (button D in figure 4).
2.
Figure 5 will appear.
3.
Click on D in figure 5. The ‘Properties’ window will appear.
4.
You can change the image settings in this window.
5.
The ‘Video Settings’ tab contains a ‘Banding filter’ option, which you can use
to set the frequency of the electrical mains. In Europe, this is usually 50 Hz. If
necessary, contact your energy company. This prevents a flickering image
when using indoor lighting.
6.
You can also alter the brightness, contrast and colour settings in the ‘Video
Proc. Amp’ tab.
7.
Once you have made the desired settings, click on ‘Apply’ and then ‘OK’.
8.
Click on C in figure 5.
9.
Figure 8 will appear. Here, you can alter the colour settings, the image size
and the frames per second (see table 5 and figure 8).
10.
Once you have made the desired settings, click on ‘Apply’ and then ‘OK’.
11.
Click on A in figure 5 to make a video recording or click on B in figure 5 to
take a photograph.
12.
The recordings will appear immediately in the SPYCAM Manager.
13.
You can save the recordings or send them via e-mail as described in
chapters 9.1.1 to 9.1.3.
9.2
Ulead Photo Express
9.2.1 Loading
photographs
1.
Click on ‘Start – Programs – Ulead Photo Express 4.0 SE – Ulead Photo
Express 4.0 SE’. Figure 6 will appear.
2.
In the main Photo Express menu, select ‘Get Photo’ and then select ‘Digital
Camera’
3.
The TRUST 500FX POWERC@M FLASH is visible in this window. Select
‘Digital camera’ and click on ‘OK’.
4.
TRUST 500FX POWERC@M FLASH will now be seen for ‘Select data
source’ in the top left-hand corner of the window. You may have other
cameras installed on your computer. If this is the case, a different model may
be visible. Select the TRUST 500FX POWERC@M FLASH.
5.
Click on ‘Acquire’. The TWAIN window will appear (see figure 7).
Function
Description
A
Photo
Photograph taken in the highest resolution (1248 x 960).
B
Photo
Photograph taken in the lowest resolution (624 x 480).
C
Videoclip
Can be recognized by VIDEOXXXX.
D
Video mode
Live image.
E
Camera mode
The photographs in the camera’s memory.
F
Transfer
Transfers the chosen recording to the application.
G
Transfer All
Transfers all the recordings to the application.
H
SAVE AVI
Saves the video clip (B) on the computer.
