Trust ISDN 128, User Manual

Page: 22 / 49

18
Local echo: OFF or ON, depending on remote
site. ON displays all remote
commands on local screen.
Modem messages:
Transmits result codes as digits or
words. Default setting: no
transmission.
Answer incoming calls: on - accepts incoming calls to the
number specified in the Call number
box.
off - rejects incoming calls.
Call number: Phone number assigned to
Trust.VCOM for answering incoming
calls. This box is only available if
you set the option "Answer incoming
calls" to
on.
Selected protocol: Be sure the selected protocol is
identical to your counterpart's
protocol.
Note
Trust.VCOM saves the most recent settings. However, these settings may
sometimes be disabled when your COM port application automatically initialises
on start up.
5.4 Trust.ISDN WAN-NDIS Miniport
Trust.ISDN WAN-NDIS Miniport is an interface that lets you
use Windows 95 Dial-Up Networking and Microsoft ISDN
Accelerator Pack (IAP). You can use two B channels together
to obtain a throughput of 128 kbps.
5.4.1 Installing
The Miniport should be installed together with the rest of the
drivers during the installation process in chapter 4. If the
Miniport driver is not installed, follow this steps:
1. Check if the ‘Microsoft's ISDN Accelerator Pack (IAP)’ is
installed:
•
Click ‘Start’, point to ‘Settings’, and select ‘Control
Panel’.