24
Wearing parts
E459EN_05.DOC
6. Wearing
parts
Designation
Material No.
Blade standard for the machining of
materials with a tensile strength of up to
400 N/mm²
Select the drawing file using the file selection
masks.
(e.g. mild steel, aluminium)
130879
Blade high-tensile for the machining of
materials with a tensile strength greater than
400 N/mm² is
(e.g. chromium steel)
130880
To ensure fast delivery of the correct original and wearing parts:
1. Give the order number.
2. Enter further order data:
–
Tension data
–
Number of pieces
–
Machine type
3. Give complete dispatch data:
–
Correct address.
–
Required delivery type (e.g. air mail, courier, express mail,
ordinary freight, parcel post).
4. Send the order to the TRUMPF representative office. For
TRUMPF service addresses, see the address list at the end of
the document.
Table 8
Ordering wearing parts
