E459EN_05.DOC
Operation
19
4.1 Working with the TruTool TKF 700
1
1 On/Off
switch
Move the On/Off switch to the front.
Note
The cutting result is improved and the service life of the cutting tool
increased if the cutting track is coated with oil before machining the
workpiece.
Material
Oil
Steel
Punching and nibbling oil, Order No. 103387
Aluminium
Wisura oil, Order No. 125874
Recommendation for oil
1. Do not move the machine towards the workpiece until full
speed has been reached.
2. Machine/process the material.
–
Place machine on the sheet and at first maintain a few
centimetres clearance between the blade and the sheet
edge.
–
Carefully slide the machine as far as possible against the
sheet edge "piercing".
–
Slide the machine along the sheet in such a way that the
machine axis is roughly parallel to the sheet edge.
–
Press the machine against the sheet edge while doing so.
Move the On/Off switch to the rear.
Switching on and off
Fig. 28208
Switching on the
TruTool TKF 700
Table 6
Working with the
TruTool TKF 700
Switching off the
TruTool TKF 700
