18
Operation
E459EN_05.DOC
4. Operation
Caution
Damage to property possible due to too-high network
voltage!
Damage to the motor.
Check the power supply. The power supply must correspond
to the information on the machine type plate.
Warning
Danger of injury possible due to improper handling!
When working with the machine, always ensure that it has a
secure base.
Never touch the tool while the machine is running.
Always guide the machine away from the body while working.
Do not work holding the machine above your head.
The appliance may switch off prematurely when affected by
electromagnetic disruptions. The appliance will resume operation
when the faults have been cleared.
If the motor temperature is too high, the motor will switch off. The
red indicator light (LED) with the motor lights up.
Allow the machine to run in idle until it has cooled down.
The machine can be operated again normally after it has cooled
down.
Note
Check the cutting edge of the blade hourly.
Electromagnetic faults
Motor overload protection
