Truly TBG-460GC, User Manual

Page: 8 / 19

Set the Day
1. Press up/dowm button until the correct day
appears.
2. Press the “memory” button, and the hour segment
will start blinking.
Set the Hour
1. Press up/ down button until the correct hour
appears.
2. Press the “memory” button, and the minute
segment will start blinking.
Set the Minute
1. Press up/ down button until the correct minute
appears.
2. Press the “memory” button then measurement unit
segment starts blinking.
1. Press the up/dowm button until
the correct measurement unit
appears.
2. Press the “memory" button
will show "OFF" on the screen
and power off.
Chapter 3 How to perform Test
3.1 Before Testing
-7-
Coding the Meter
TBG-460GC meter should be coded before testing with test Strips for
the first time, or every time a new box of test strips is used. Each vial of
test strips has an assigned code number. The code strip is packaged
with the test strip in order to calibrate/code the meter. Every time a test
strip is inserted, please be sure to check the code number appearing on
the screen is the same as the code number marked on the test strip vial.