background image

-15-

Chapter 8 Error Message and Trouble Shooting

 Message

   

Cause

                        

Solution

There will be a problem with 
the test strip. 

Repeat the test with a new test
strip. If the problem persists, 
please contact the dealer for 
service.  

E-0

E-b

The power of the battery is 
too low to run a test. 

Replace the battery at once.

E-A

The reference voltage or
other circuit is error. 

Call local authorized distributor
for help and service. 

The test strip may be 
removed after applying 
blood the absorbent hole.  

Revlew the instructiona and try
again with a new test strip.
If the problem persists, please
contact the dealer for service.  

E-9

Chapter 7 Storage and Handling of Meter and Strips

Due to sensitive to heat and humidity, the performance of test strips 
may be affected by improper storage and handling. Please store the
test strips and meter carefully according to the specifications listed in
chapter 8.

Note:

● 

Store the meter, code strip, test strips at room temperature. Do 

     not expose them beyond the range described in Chapter 8.

● 

Do not freeze or refrigerate the meter and strips.

● 

Keep the meter clean by wiping the exterior of the meter with 

     a tissue or lint-free cloth. 

Summary of Contents for TBG-460GC




















Reviews: