background image

-11-

Note :

The TBG-460GC Monitoring System includes glucose and 

    total cholesterol test that are all plasma calibrated. The user does 
    not have to convert it into plasma result.
2. Use the strips before the 

 date, the strips can only be used 

    within 3 months remaining shelf life after the first opening of the
    vial.
3. Apply the blood sample onto the correct position of the strip 
    precisely, follow the directions to 
4. Prohibited applying the blood sample to the test strip twice, it will 
    cause inaccurate test results.        

1. 

expiry

avoid incorrect operations.

3.5 Care after the Test

Directions:
1. Improper usage of the meter, such as dropping, bumping or other 
    violent impact may cause the meter damaged.
2. Please keep meter away by interferences of magnetic, 
    electromagnetic, and radioactive.  

Warning :

Do not disassemble the meter for any reason.

2. Please follow local regulations to discard used test strips 
    and lancets.
3. Used test strips, lancets and any other materials that have
    come in contact with blood should be treated as potential 
    biohazards. If a user has an infectious disease, used test 
    strips and other materials could be a sources of infection.  

1. 

3.4 Special messages

Mode                                          Lo                                             Hi
Glucose                 < 20 mg/dL  (1.11 mmol/L)     > 600 mg/dL (33.3 mmol/L)
Total Cholesterol   < 100 mg/dL  (2.59 mmol/L)   > 400 mg/dL  (10.35 mmol/L)

Summary of Contents for TBG-460GC




















Reviews: