-14-
Chapter 6 Installing/Replacing the Batteries
Batteries
A 3V lithium battery (CR2032) is included in the meter package.
Use only 3V lithium batteries. Do not use or replace the battery with
different types of batteries. Doing so will damage the electronics of
the meter.
Instructions :
1. Hold the meter with one hand, slightly lift the back cover lid to open
the back cover.
2. Insert a new battery in the meter with the "+" side facing up, you
will hear a "beep" sound which indicates that meter is
.
3. Place back the cover onto the meter.
ready
5. After the 28day-average, the latest stored result M01 appears on the
screen. Then you can read the stored result from M01 to
M360(Glucose mode) or from M01 to M50(Cholesterol mode) by
pressing Down or UP Button.
6. Press the “memory” button for over 3 seconds and the meter will turn
off after a long “beep” sound. Meter will also automatically shut down
after 3 minutes without any operation.
Note :
If 360 test results are already stored and a new one is added, the
oldest test result is automatically overwrited. The newest result will
be shown in M01.
Summary of Contents for TBG-460GC
Page 19: ......
