-13-
TBG-460GC meter automatically stores up 360 blood glucose
and 50
cholesterol
test results. It also provides you with 7-, 14-, 21- and
28-day averages of the blood glucose test results. Please follow
these directions to recall stored test results.
Directions :
1. Make sure that no test strip is inserted in the meter.
2. Press the “memory” button once to turn the meter on. After a short
“beep” sound a full display will appear on screen then the meter
enters standby mode.
3. Press the “memory” button once again and the meter stays at
memory mode. The 7-day average (7 DAY.A) will display on the
screen.
4. Followed by 14, 21 and 28-day average when press the “memory”
button repeatedly.
Note :
The day average function can be applied to glucose test mode only,
total cholesterol test mode do not have the day average function.
Chapter 5 Meter Memory Function
.
Please read this user's manual for control solution test carefully
before use.
.
Do not reuse the Test Strips and close the Test Strip Vial lid tightly
after use.
.
The first three drops of Control Solution must be discarded and the
vial should be shaked well before use when the vial is newly opened.
.
Newly opened vial of Control Solution and Test Strips must be
marked with the opening date.
.
Glucose Control Solution is used for glucose test mode And
Cholesterol Control Solution is used for cholesterol test mode.
.
If the test results fall outside the control range, please reconfirm and
repeat the test, if it is still fall outside the range, please contact
authorized distributor for help and service.
.
Control solutions are not included in the system, please contact your
distributor if you want to do a quality control test.
Summary of Contents for TBG-460GC
Page 19: ......
