Trueshopping 5 in 1 Petrol, Assembly & Owners Manual

Page: 7 / 250

! Never use the brush cutter or strimmer
bump head without the guard attached as
objects can be thrown up.
! Do not use the machine for any purposes
other than outlined in this
manual .
! It is good practise to clearly mark your
working area
.
! Turn the machine off when moving
location.
Protecting the Machine
! Only use recommended parts, consult the
manufacturer to obtain these.
! Always use the correct tool for the correct
job. Use the tool only for its designed
purpose.
! Only use non-metallic fibre in your
strimmer.
! Ensure that the machine is stored in a dry
area in a secure place. Parts of the tool are
sharp and should not be left within reach of
children / pets.
! Inspect the machine for damage before use,
and ensure all components are properly
aligned.
! Use of third party strimmer heads can
potentially cause damage to the machine
Minimum Age
Only persons over 18 years of age are legally
allowed to operate this machine unless under
training supervision.
Recommended use
The unit is recommended for general use in
agriculture, forestry and gardening.
Emergency Action
In the event of injury, seek qualified medical
assistance and apply first aid to the injury. If
you are the responder, protect the injured
person from further injury.
! The user is responsible for any m aterial /
personal damage resulting from improper
use.
! Please note that if not properly used, the
following injuries can be caused –
Contact with an uncovered Strimmer head –
Laceration
Reaching into the running scythe –
Laceration
Hearing problems if proper ear protection
not used
Carbon monoxide poisoning if used in an
enclosed area.
Safe Operating Instructions
! Do not operate the machine if you suspect
the machine has a problem.
•
Always visually inspect to see that the
blades and bolts are secure . Ensure
the engine vents are free from any
dirt or remnants.
•
Operate the machine at the lowest
possible engine speed to do the job.
• Keep your hands and feet clear of the
attached tool when the machine is
running.
• Keep both hands firmly on the
machine at all times.
•
Always use the machine with the
supplied carry strap.
• Always wear appropriate hand, feet
and hearing / eye protection when
operating the machine.
• Do not use metal cutting coils.
•
Pay attention, the machine will
continue to run for five seconds after
the engine has stopped.
5