Trueshopping 5 in 1 Petrol, Assembly & Owners Manual

Page: 11 / 250

Shoulder harness assembly
The shoulder harness clips to the handle of the
main engine as shown below.
Starting the Multi tool
! Please be aware that a certain degree of
effort is required to successfully start the
multi-tool, please persevere if you are
struggling to start the engine.
•
Pull the switch into the on “I” position and
hold the throttle lockout and then pull the
throttle trigger.
•
While still holding the above, press in the
switch next to the on/off switch .
• Slowly release all three and you should
note that the switch stays pressed in.
•
Now we need to prime the engine with
fuel for use. Press the priming bulb on the
unit several times (8-10) to prime the
machine.
• To start the engine, push the choke lever
upwards and pull the starter cord.
9