Trueshopping 5 in 1 Petrol, Assembly & Owners Manual

Page: 32 / 250

•
Now wrap the cord around the inside of
the head until you are left with approx.
15cm of spare cord.
•
Feed the remaining two loose cord ends
back into the metal holes ensuring you
firmly pull it through each side
•
Now reassemble the head and the refilled
unit is ready to be used.
General Maintenance
The engine
Please check the following regularly to ensure
optimum performance –
•
The a ir filter
•
The spark plug
• The starter cord for damage or fraying
! Always switch the unit off before
maintenance or repair!
Guide rail (Chain pruner)
•
Turn the guide rail over every time
you replace the chain, this will
prevent wear to just one side of the
rail.
Chain maintenance
A properly sharpened chain should go easily
through small branches / pieces of wood .
Don’t work with a dulled or damaged chain as
it will increase the physical exertion required
to cut and may cause injury / damage to the
machine .
• Keep the chain clean and free of
debris between uses.
•
Check the chain for cracks and
damaged rivets.
30