Truen TCAM-570-X18H, User Manual

Page: 5 / 55

TCAM-570-X18H User Manual
1.3 Megapixel Speed Dome User Manual
5/55
Serial Data
•
RS-485 support
•
Data pass-through mode : Serial data communication between TCAM-570-X18H and Decoder
Sensor and Alarm
•
Support direct connections of external sensor and alarm devices
•
Event Alarm notification.
•
2 alarm sensor Inputs and 2 alarm Output relays are available
•
If an external sensor is activated, camera can be set to move to the corresponding Preset
position.
User Interface
•
Diagnose and upgrade through dedicated program called True Manager
•
System configuration using Internet Explorer
High Reliability
•
Reliable embedded system
Powerful Pan/Tilt Functions
•
Max. 360

/sec high speed Pan/Tilt Motion
•
Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a
result, time to target view is reduced dramatically and the video on the monitor is very natural to
watch.
•
For jog operation using a controller, since ultra slow speed 0.05

/sec can be reached, it is very
easy to locate camera to desired target view. Additionally it is easy to move camera to a desired
position with zoom-proportional pan/tilt movement.
Preset, Pattern, Swing, Group
•
MAX. 98 Presets are assignable and characteristics of each preset can be set up independently,
•
Max. 8 set of Swing action can be stored. This enables to move camera repetitively between
two preset positions with designated speed.
•
Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow
any trajectory operated by joystick as closely as possible.
•
Max. 8 set of Group action can be stored. This enables to move camera repetitively with
combination of Preset or Pattern or Swing. A Group is composed of max. 20 entities of
Preset/Pattern/Swings.