Truen TCAM-570-X18H, User Manual

Page: 13 / 55

TCAM-570-X18H User Manual
1.3 Megapixel Speed Dome User Manual
13/55
Communication Protocol Setup
1 2 3 4
ON
ON

Select the appropriate Protocol with DIP switch combination.
Switch State
Protocol/Baud rate
P0
(Pin 1)
P1
(Pin 2)
P2
(Pin 3)
OFF OFF OFF PELCO-D, 2400 bps
ON OFF OFF PELCO-D, 9600 bps
OFF ON OFF PELCO-P, 4800 bps
ON ON OFF PELCO-P, 9600 bps
Otherwise Reserved

If you want to control using DVR or P/T controller, their protocol must
be identical to camera. Otherwise, you can not control the camera.

Adjust the DIP switch after turning off the camera. If you changed the
camera protocol by changing the DIP switch, the change will be effective
after you reboot the camera.
 Factory default of protocol is “Pelco-D, 2400 bps”.