Truen TCAM-570-X18H, User Manual

Page: 39 / 55

TCAM-570-X18H User Manual
1.3 Megapixel Speed Dome User Manual
39/55

Check IP Disable: If
“Check IP Disable” is selected, IP Server will skip to check its own IP. In Fixed IP
mode, the set IP will be registered on DDNS server. In DHCP mode, the Allotted IP will be registered on
DDNS server. Normally Check IP Disable can be unchecked.
Bitrate control

When there are more than one client connected to TCAM-570-X18H, due to bandwidth difference
among the clients some of them do not have enough bandwidth to receive encoded stream completely.
In this case, it is possible to select the way to stream video to clients as following.
- Frame Drop Mode: Encoding will be adjusted to the client with the highest bandwidth. Clients with
limited bandwidth may not receive all the frames
- Suppression Mode: Bit rate and frame rate are adjusted most efficiently for all clients. In this case,
all clients can be affected by the averaged bit rate and frame rate.
Address Info

Followed network information is displayed (Read only)
- IP Address: The Camera own IP address. This information is useful when the camera
‟s IP mode
is set to DHCP.
- Domain Name: In case the camera is registered at DDNS server, the registered domain name is
displayed.
- MAC Address: Display the MAC address of the camera. In case the camera is registered at DDNS
server, the MAC address is used in DDNS registration.
- Connecting: Client IP Addresses that are currently connected to system are listed. (1) Indicates
Primary streaming and (0) indicates secondary streaming.