Truen TCAM-570-X18H, User Manual

Page: 41 / 55

TCAM-570-X18H User Manual
1.3 Megapixel Speed Dome User Manual
41/55
Serial Port Configuration

Serial Port Information
RS-485 in TCAM-570-X18H support one RS-485 serial port
The camera
‟s serial port information is displayed automatically once the camera reboots after the DIP
switch setup of the camera.

PTZ Type & ID: PTZ Type & ID are displayed automatically once the camera reboots after DIP switch
setup. The default PTZ Type and ID is Pelco-D and 2400bps .
Sensor Type

There is two sensor input ports on TCAM-570-X18H.The sensor port can be configured to the following.
Function Operation
OFF Not used
NO (Normally
Open)
The port is normally open and activated when
closed.
NC (Normally
Closed)
The port is normally closed and activated
when opened.
The function of the sensor port is set based on the type of the sensor connected.
Sensor Schedule

Choose Sensor OFF or Sensor ON and click or drag the below schedule cells to make Sensor
Schedule according to day of week and hour.