4
When using this machine, these safety precautions should always be followed to reduce
the risk of fire, electric shock, damage to property, or injury to people:
(1)
Only use the adapter provided with your device. Otherwise, make sure the power
supply is within the range of this device before supplying power.
(2)
Unplug the device from the AC socket immediately when there is unusual smell,
heating or smoke. Please contact your local dealership or contact us for
inspection.
(3)
Do not use CS07 in case there was a strong impact on it or it was dropped.
Please contact your local dealership or contact us for inspection.
(4)
Do not attempt to repair, modify or disassemble the equipment. These procedures
should only be undertaken by True Soltec or other qualified service personnel.
(5)
Unplug the machine and other surrounding devices from AC outlet, before
installing or connecting CS07 to other devices.
(6)
Do not let liquids or foreign objects (such as staple or clip) enter CS07, as it could
result in short circuit. Should any liquids or foreign objects enter the device, switch
the power off immediately and contact your dealership or contact us for
inspection.
(7)
Avoid places where high moisture or humidity (such as bathroom) are present.
Do not touch or use the device with wet or damp hands when the power is on.
(8)
Wear rubber gloves and insulated boots in order to avoid electric shock that might
happen if accidentially touch the conductor.
(9)
Wear safety googles to avoid the risk of etching solution flying into your eyes
when handling this equipment.
(10)
Do not touch the terminal surface within the first few minutes after etching. It might
cause a burn.
