30
7.5 CUTTING THE BIG WIRES
Cutting big terminals will produce a large amount of metal dust. Therefore, it is necessary
to activate the vacuum cleaner.
1. On LCD operation panel, select
Setting
button.
→ Setting screen appears
At
Air brow
, touch
OFF
button
→ It will switch to
ON
2. On the LCD panel, big wire cutting mode
(Large) is automatically recognized.
Check if cutting mode is activated or not.
: Activated
: Deactivated
If the cutting mode is not activated, touch
Cutting
button
→
It will switch to green (activated)
3. Press
START
button
→ CS07 automatically cuts the terminal.
When the transfer unit reaches its leftmost limit, it
will then return to its home position.
※
After the terminal is cut, if you want the transfer
unit to return to its home position immediately,
press
START
button.
