37
4. Pull the level down
→ Place the clamp on the transfer unit.
Align the clamp fixing hole with the
cylindrical pin.
→ Release the lever.
Grinding wheel thickness: 5mm
Wire barrel total length: 5mm or less
※
Each clamp has 2 holes on its body:
●
Fixing hole:
Used when placing the clamps
on the transfer unit.
●
Fitting hole:
Used when placing the clamps
on the clamp holding stand.
5. Adjust the cutting position.
→ The conductive barrel should be within the range of the grinding wheel’s thickness.
※
Refer to
4.2 Adjusting the cutting position
(page 12) and CS07HI operation manual for
details.
Fitting hole
Fixing hole
