SRS and XRS EID Stick Reader
Issue 2, 02/2013
4
Service equipment
To service a Tru-Test EID Stick Reader, you will require the following equipment:
Item
Description
Multi-meter
Good quality digital type with 300 mA and 300 mV range.
Screwdrivers
Pozi-drive, size 1 (for PCAs and case screws
– torque setting 0.5 Nm
(4 lb-in.)).
Phillips, size 1 (for dust cap lanyard screws).
A driver with adjustable torque setting is strongly recommended.
DO NOT use a variable speed electric drill!
Socket
11 mm (for nut on connector
– torque setting 0.23 Nm)
A driver with adjustable torque setting is strongly recommended.
DO NOT use a variable speed electric drill!
Pliers
Long-nose, side cutting.
Rubber mat
Suitable for placing the stick reader on while servicing.
Soft cloth
For cleaning LCD.
Compressed air aerosol
For blowing away plastic swarf, dust and dirt from the inside of the
case.
Thread locker
For example, Loctite 243.
Test tags
FDX and HDX test tags
Main module
Known good sample
Display module
Known good sample
Computer
Windows XP
or later with EziLink
™ and Hyperterminal installed.
EziLink is supplied with the stick reader, or available on request from
Tru-Test Limited. Hyperterminal is bundled with Windows XP or may
be downloaded from http://www.hilgraeve.com/hyperterminal-trial.
Tru-Test EziWeigh7, ID3000
or XR3000 weigh scale
indicator.
To test
Bluetooth
® wireless connection between the stick reader and
the weigh scale indicator.
Storage medium for returning
back-up data to customer
CD ROM or DVD
Documents you will require
The following documents are referred to within this service manual and will be required when servicing
the stick reader. They can all be downloaded from the Tru-Test website www.tru-test.com
Technical Bulletin
– XRS EID Stick Reader – Connecting to XR3000, EziWeigh6, EziWeigh7 or a PC
Technical Bulletin
– XRS EID Stick Reader – XRS not connecting over
Bluetooth
wireless connection
XRS EID Stick Reader User Manual
SRS EID Stick Reader Quickstart Guide
