SRS and XRS EID Stick Reader
Issue 2, 02/2013
26
Figure 4 Gasket being pressed against the surface
7
Insert the battery with the metal battery terminals inserted first towards the main module.
8
Replace the battery compartment cover.
Replacing the case gasket
1
Open the case. See page 24.
2
Disconnect the FFC from the main module. See
Using flat flexible circuit (FFC) cables and
3
Using your fingers, gently peel away the case gasket from the bottom case. Be careful not to
damage the mating surfaces of the case. Do not use a knife to remove the gasket as it may
damage the case, even a small cut can create sealing problems.
4
Ensure the case gasket groove is clean.
