TROY Group WindConnect, User Manual

Page: 18 / 34

2-8
Disconnecting
Your Bluetooth connection will automatically be disconnected after one minute of
inactivity. You can change this parameter by right clicking on the Windows print-
er icon for your printer and clicking on
Properties . If you are using Windows
NT/2000/XP, click on the Ports tab, click on the TBT port and then click on
Configure Port . If you are using Windows 98/ME, click on the Details tab,
click on the TBT port, and then click on Port Settings . Then enter the desired
time in the Minutes until disconnect after print box and click OK .
NOTE:
If you are using the TROY, IBM, or Toshiba
Bluetooth Software Suite V1.09, the
WindConnect Port Monitor software conflicts with the Bluetooth Neighborhood
program and potentially other third-party Bluetooth programs. This conflict
requires you to temporarily disable the
WindConnect Port Monitor whenever you
need to use the Bluetooth Neighborhood or other Bluetooth program. To do
this, click the Start button, select WindConnect
Bluetooth Software, and click
WindConnect Bluetooth Utility. When you get the WindConnect Bluetooth Utility
Dialog, click the Stop <dga> API Use button. This will cause the Port Monitor
to suspend its operation so that you can use the
Bluetooth Neighborhood. To
resume the Port Monitor operation, click the Resume <dga> API Use button.
Note that this problem is fixed in the
Bluetooth Software Suite V1.10 and later.