Section 1
Introduction
WindConnect II Printer Adapter with
Bluetooth
Technology User’s Guide -- Document #40xxx-110 Rev. X3
1-1
Overview
The TROY WindConnect II printer adapter with Bluetooth
®
technology is a wireless print device that (depending
on the model purchased) plugs directly into the USB or parallel port of your printer. By using the WindConnect
II, you can conveniently print from a desktop or laptop computer and other devices that use
Bluetooth
technology without using a cable. Please refer to the Quick-Install Guide provided in the product package for
hardware setup information. For additional information on this product, visit the TROY web site at
www.troygroup.com
.
This manual covers installation and configuration of the WindConnect II for use with computers, pocket PCs
(PDAs), or mobile phones that have either embedded
Bluetooth
technology or are equipped to use an external
adapter that uses
Bluetooth
technology. A troubleshooting section is also provided in the event that your
WindConnect II does not perform as specified.
The WindConnect II supports the following profiles:
Serial Port Profile (SPP)
Object Push Profile (OPP)
Hardcopy Cable Replacement Profile (HCRP)
Basic Printing Profile (BPP)
Basic Imaging Profile (BIP)
The WindConnect II can be used with devices that use
Bluetooth
technology and support one of these profiles.
NOTE: The BPP and BIP profiles are supported on selected printers (refer to the TROY web site at
http://www.troygroup.com).
NOTE: Some sending devices will automatically time out after a few minutes of inactivity. Other sending
devices will keep the connection active until forced to disconnect.
IMPORTANT: Other users will not be able to use the WindConnect II while the connection is active with your
sending device.
