26
Fig. 17
Oil Fill Plug
Oil Fill Hole
O-Ring
Fig. 18
Maximum
Oil Level
Bottom Thread
Oil Fill Hole
CHANGING THE OIL
Change the oil while the engine is still warm. The oil will flow freely and carry away more impurities.
1. Clean the area around the oil fill plug (Fig. 17) to prevent debris from entering the oil fill hole.
2. Unscrew the oil fill plug.
3. Tip the unit vertically to pour the oil out of the oil fill hole and into a container (Fig. 19). Allow
ample time for complete drainage.
NOTE:
Dispose of the old oil according to federal, state and local regulations.
4. Wipe up any oil that may have spilled.
5. Pour 3.04 fl.oz. (90 ml) of SAE 30 oil into the oil fill hole (Fig. 17).
6. Wipe up any oil that may have spilled.
7. Make sure the O-ring is in place on the oil fill plug (Fig. 17).
8. Reinstall the oil fill plug.
WARNING:
DO NOT
overfill the crankcase.
OVERFILLING THE CRANKCASE MAY CAUSE SERIOUS PERSONAL INJURY. Refer to
Checking
the Oil Level
.
Summary of Contents for 25A-304-766
